A blog article has been published
Quickly to a customised solution
With its tool configurator (HTC - Horn Tool Configurator), Horn offers the possibility of supplying grooving tools in a short lead time. Horn focuses here on the grooving insert system 117. Following an enquiry from the customer, the HTC system ...
from Jessica Nossekon 2024-04-24 at 10:00A blog article has been published
PTO shaft milling
Horn is expanding its tool portfolio for gear cutting to include types for milling PTO shafts. Manufacturers are increasingly focusing on the complete machining of drive shafts. Horn has standardised its own tool range for this purpose, which ...
from Jessica Nossekon 2024-04-18 at 08:46A blog article has been published
For difficult applications
Hard shell - soft core: Horn has developed the new SG66 grade for turning workpieces having different hardness zones. When machining turned parts with hardened surface layers or with an interrupted cut, users quickly reach the limits of CBN ...
A blog article has been published
Extremely hard grade for strong brakes
Horn is launching a new product range for the economical machining of brake discs. This includes solid CBN ISO inserts and solid CBN-tipped full radius and shaped inserts. In addition to the inserts, stable tool carriers round off the product ...
A blog article has been published
Geometry for high feed rates
Full radius ahead - with the new KR cutting edge geometry, Horn presents an indexable insert for high feed rates. The geometry is highly capable for groove, longitudinal and copy turning. The cutting edge demonstrates elevated performance ...
A blog article has been published
Groove and cut-off milling system M475
Horn introduced a new-generation groove and cut-off milling system. The tool system enables economical, highly productive milling performance. To round off the milling system for narrower grooves, Horn is expanding it to include smaller inserts ...
A blog article has been published
HORN at NORTEC Hamburg 2024
NORTEC Hamburg is in full swing. Explore innovations, live machining and much more at the HORN stand in Hall A1 at Stand 320.
A blog article has been published
Gear milling cutters in record time
With its tool configurator (HTC – HORN Tool Configurator), Horn offers the possibility of supplying gear milling cutters in a short lead time. Horn focuses on its own circular milling system. After the customer's enquiry, the HTC system ...
from Jessica Nossekon 2023-11-03 at 16:00A blog article has been published
Adjustable damped boring bar
Long tool overhangs can cause a turning tool to oscillate when boring internal geometries. In addition to the resulting chatter marks on the surface, these vibrations also lead to a significant reduction in tool life. For unfavourable ...
from Jessica Nossekon 2023-07-13 at 16:00A blog article has been published
Combined expertise for the medical industry
Functionally integrated implants through novel synchronised machining processes - ZykloMed With the joint project funded by the Federal Ministry of Education and Research (BMBF), the participating partners INDEX, Paul Horn GmbH, Beutter ...
from Jessica Nossekon 2023-07-10 at 11:26
- Show More Entries